Tower Harness 

Code

Description 

1500

Tower harness ideally suited to telecommunications and power industries. Features supportive padded waist and buttock strap for all day comfort. Incorporates a rear fall arrest D, front fall arrest loops, confined space shoulder loops, large side rings for positive attachment, and auxiliary side Ds for double pole strap applications. The breathable rear mesh panel gives the harness form for easy donning. The quick connect leg buckles are easy to adjust and do not creep under continuous cycling.

2700

Pole strap 2.5 m with adjuster and snap hooks

2701

Pole strap 3.5 m with adjuster and snap hooks

2750

Pole strap for steel work, 2.5m with snap hooks fitted with our robust Secutex cut resistant sleeve. Secutex is used extensively throughout industry to protect synthetic lifting slings from sharp edges and generally outlasts the life of the sling. Contact us for further information about Secutex.

STANDARD FEATURES

1

Suitable for Rescue from - Fall Arrest Lanyards, Vertical Fall Arrest Systems and Webbing Fall Arrest Blocks.

2

Bladeless cutting - The casualty is released by cutting their primary attachment with a unique bladeless cutter for safety and accuracy.

3

Rescue direction - The SHARK is a descent rescue kit and rescue entails the rescuer descending to the casualty, collecting them and descending to safety.

4

Pre-assembled - No assembly is required by the user.

5

Assisted rescue - The rescuer accesses the casualty in order to 
recover them.

6

Two person use - The Gotcha SHARK is rated for loads up to 300kg in normal use.

7

Maximum Working Length - Gotcha SHARK kits are available in the following lengths which define their working length. 30 Metre, 50 Metre, 66 Metre and 100 metre lengths.

Also available: Gotcha Shark TC. Same as the above but rigged in reverse to allow the rescuer to lower the casualty from height while remaining on the structure.

STANDARD FEATURES

1

Suitable for Rescue from - Fall Arrest Lanyards, Fall Arrest Blocks, Flexible Line Fall Arresters and Work Position Lanyards.

2

This is a no-cut kit - The casualty is raised to release their original attachment, but the kit does include a safety knife in case of difficulty when raising the casualty.

3

Rescue direction - You can raise or lower the casualty with this kit. This will allow raising to release or free a snagged casualty and lowering to a point of safety.

4

Pre-assembled - No assembly is required by the user.

5

Assisted rescue - The rescuer accesses the casualty in order to 
recover them.

6

Single person use - The Gotcha Pole Top Rescue kit is for raising or lowering a single person.

7

Maximum Working Length - The Gotcha Pole top rescue 
kit is suitable for use on poles up to 15 metres high.

Also available: Gotcha Shark TC. Same as the above but rigged in reverse to allow the rescuer to lower the casualty from height while remaining on the structure.