SpanSet®

.
WATERWORKS
Premium Corrosion Resistant Range 
Corrosion resistant height safety equipment for the oil & gas, offshore,
stevedoring, water utilities, chemical and sewerage treatment industries


Introducing the new WATERWORKS range of harnesses from SpanSet, suited to the extreme environments of the offshore, oil & gas, chemical, water utilities & sewerage treatment Industries. Made in Australia these AS/NZ 1891.1 2007 approved premium harnesses are manufactured to ensure comfort , safety, and longevity, incorporating our xtreme-guard oil, water & abrasion resistant webbing.

The soft, fixed, breathable composite mesh and foam padding gives the harness form, virtually eliminates tangling, and enhances the likelihood of correct fitting. Fitted with corrosion resistant stainless steel D rings and buckles which feature no moving parts for the ultimate in reliability and safety.
 

Non padded versions are also offered.
 

STANDARD FEATURES

Code

Description 

1

Confined space attachment loops
Fully encapsulated loops to eliminate snagging and minimise metal components in contact with the body.

2

Stainless steel easy glide buckles 
Easy to adjust and webbing friendly. They do not creep in use and are as small as possible to minimise metal contact with the body.

3

Integral composite foam/mesh breathable padding
Fits like a jacket and is virtually tangle free. Almost impossible to fit incorrectly leading to safer compliance. Offers the security of being permanently affixed while still allowing full adjustment.

4

Suspension relief straps
Should an operative become suspended and is still conscious, simply join the two adjustable
straps together to form a loop into which the operative can stand in order to further relieve the
pressure on the inner thigh and work the leg muscles to aide circulation.

5

 Soft construction 
The hip is a critical pressure point when a fall occurs. The presence of any metal component here can increase the chance of injury, hence our “soft” approach.

6

Stainless steel easy glide 2/3 bar connector buckles 
Safe and proven over many years to be the most secure method of connection. These buckles have no moving parts, no catches or springs to get jammed by dirt, dust, or loose clothing. Corrosion resistant, easy to adjust and sized to minimise the metal to body contact.

7

Padded leg straps
Simplifies the donning by virtually eliminating twists in the leg strap. Greatly enhances comfort should an operative become suspended.

8

Large stainless steel D ring
Easy to locate and connect to. The large D is always orientated correctly due to the design and configuration of the webbing. It does not require springs or gadgets to hold it in place.

Sub Pelvic Strap 
The sub pelvic strap eliminates the potential to “peel” out of the harness when falling backwards in a crouched position, (when the folded body allows the buttocks and upper legs to slip out of the back of the harness). Many harnesses do not have this feature or the design is insufficient to retain the person in this manner.
10 Front stainless steel D ring rated for fall arrest
For ease of rescue.




Xtreme-Guard Webbing with Self Healing Matrix


A super soft feel webbing which has been treated with a non toxic compound to maximise
oil and water resistance. This makes cleaning a much easier task and enhances abrasion
resistance. The treatment will self repair should the extremely thin polymer coating become
damaged due to mechanical influences due to its plasticine like flow qualities and the ability
to re-close mechanically affected areas itself



1100 WW Premium 


Full body harness with stainless steel rear D, Front fall
arrest stainless steel D, stainless steel buckles, confined
space loops on shoulders, front attachment loops,
fully adjustable padded leg straps and shoulder/back
straps, with easy-flow sweat absorbing mesh and foam
composite padding. Fitted with suspension trauma relief
straps. Suitable for fall arrest, confined space entry, roof,
ladder and rescue work.

 

 



1107 WW Premium

Full body harness with stainless steel rear D, Front fall
arrest stainless steel D, stainless steel buckles, confined
space loops on shoulders, fully adjustable padded leg
straps and shoulder/back straps, with easy-flow sweat
absorbing mesh and foam composite padding. Fitted with
suspension trauma relief straps. Suitable for fall arrest,
confined space entry, roof, ladder and rescue work.



 

 



1100  WW 


Full body harness with stainless steel rear D, front fall
arrest stainless steel D, stainless steel buckles, confined
space loops on shoulders, fully adjustable leg, shoulder
and chest straps. Fitted with suspension trauma relief
straps. Suitable for fall arrest, confined space entry, roof,
ladder and rescue work.


Click here for the data sheet for the 1100 WW
 

 



1300 WW 


Full body harness with stainless steel rear D, Front fall
arrest stainless steel D, stainless side Ds, stainless
steel buckles, confined space loops on shoulders, fully
adjustable leg, shoulder and chest straps. Fitted with
suspension trauma relief straps.

Suitable for fall arrest, confined space entry, roof, ladder,
pole, restraint, work positioning & rescue work.


Click here for the data sheet for the 1300 WW


1800 WW 


Full body harness with stainless steel rear D, Front fall
arrest stainless steel Ds for fall arrest and abseil/rescue,
stainless side Ds, stainless steel buckles, fully adjustable
legs, shoulders and openable chest strap. Suitable for fall
arrest, confined space entry, roof, ladder, pole, restraint,
work positioning, rope access & rescue work.


Click here for the data sheet for the 1800 WW


1100 WW Ergo - Miners


1100 Ergo Full body harness with Stainless Steel front
and rear D, Stainless Steel buckles, confined space loops
on shoulders, fully adjustable shoulders, chest and legs.
Padded leg straps and shoulder/back straps, with easy-
flow sweat absorbing mesh and foam composite padding.
Padded comfort waist belt with side D, battery and self
rescuer straps. Fitted with suspension trauma relief
straps.
 

 

SpanSet Australia Ltd - ABN 75 003 298 459
13 Pullman Place, Emu Plains, NSW, Australia, 2750
Phone: (02) 4735 3955 Fax: (02) 4735 3630
Copyright © 2010 SpanSet Australia Ltd